Planet WGR-500-4P User Manual Download Page 56

Page: 56 / 102

User’s Manual of WGR-500-4P and WGR-500-4PV

4.3.3 VLAN

VLAN (Virtual Local Area Network) allows a physical network to be partitioned into multiple logical networks.

Devices on a logical network belong to one group. A device can belong to more than one group. With VLAN, a

device cannot directly talk to or hear from devices that are not in the same group. Please refer to the following

sections for the details as shown in

Figure 4-28

Figure 4-28:

VLAN Setup

Object

Description

Enable 802.1Q VLAN

Check this box to enable 802.1Q VLAN function.

VLAN ID

Set VLAN ID (1-4095)

Forwarding Rule

Select Bridge or NAT mode

Hardware NAT

Check this box to enable Hardware NAT function.

Member

Add VLAN without tag to packet

Tagged

Add VLAN tag to packet

Change PVID setting

Check this box to enable change PVID (default vlan id)

Summary of Contents for WGR-500-4P







































































































Search results

Summary of Contents for WGR-500-4P

Reviews:

Related manuals for WGR-500-4P

Brands by name

Popular brands

Planet WGR-500-4P, User Manual

Search results

Summary of Contents for WGR-500-4P

Reviews:

Related manuals for WGR-500-4P

Brands by name

Popular brands