Planet WBS-202N User Manual Download Page 27

Page: 27 / 100

User Manual of WBS-202N/WBS-502N

-19-

Chapter 5. Configuring the CPE

This chapter delivers a detailed presentation of CPE’s functionalities and features 3 main items below, allowing
you to manage the CPE with ease. The screen shots use the WBS-202N as an example.

Figure 5-1

Main Menu

The page includes the following fields:

Object

Description

Operation Mode

It shows the current mode status.

Device Information

It shows the CPU/memory usage.

Device Description

You can enter the device description.

Flow (2.4G/5G Wi-Fi) bps

It shows the Upstream/Downstream graph.

LAN Information

It shows the device IP mode, LAN IP, subnet, gateway and MAC address.

Wi-Fi Information

It shows the Wi-Fi status, SSID, channel, Encryption, MAC address and
client list.

Version

It shows the firmware version (Double-click to show more detailed info.).

Summary of Contents for WBS-202N





































































































Search results

Summary of Contents for WBS-202N

Reviews:

Related manuals for WBS-202N

Brands by name

Popular brands

Planet WBS-202N, User Manual

Search results

Summary of Contents for WBS-202N

Reviews:

Related manuals for WBS-202N

Brands by name

Popular brands