Planet WAP-4030 User Manual Download Page 17

 

13 

Chapter 4 Troubleshooting 

This chapter provides answer to problems usually encountered during the 

installation

 and operation of 

the 

Wireless Network Access Point

. Read the description below to solve your problems.   

 

Q. Can I run an application from a remote computer over the wireless network? 

A. This will depend on whether or not the application is designed to be used over a network. Consult the 

application

s user guide to determine if it supports operation over a network. 

 

Q. Can, I play games with other members of the cordless network? 

A. Yes, as long as the game supports multiple plays over a LAN (local area network). Refer to the game

user guide for more information. 

 

Q. What is the IEEE 802.11g standard? 

A.  The  IEEE  802.11g Wireless  LAN  standards  subcommittee,  which  is  formulating  a  standard  for  the 

industry.  The  objective  is  to  enable  wireless  LAN  hardware  from  different  manufactures  to 

communicate. 

 

Q. What IEEE 802.11 features are supported? 

A. The product supports the following IEEE 802.11 functions: 

 

CSMA/CA plus Acknowledge protocol 

 

Multi-Channel Roaming 

 

Automatic Rate Selection 

 

RTS/CTS feature 

 

Fragmentation 

 

Power Management 

 

Q. What is Infrastructure? 

A.  An  integrated  wireless  and  wired  LAN  is  called  an  Infrastructure  configuration.  Infrastructure  is 

applicable to enterprise scale for wireless access to central database, or wireless application for mobile 

workers. 

 

Q. What is Roaming? 

A. Roaming is the ability of a portable computer user to communicate continuously while moving freely 

throughout an area greater than that covered by a single Wireless Network Access Point. Before using 

the  roaming  function,  the  workstation  must  make  sure  that  it  is  the  same  channel  number  with  the 

Wireless Network Access Point of dedicated coverage area. 

Summary of Contents for WAP-4030


















Reviews: