Step 2) Broadband Type
In this section you have to select one of four types of connections that you will be using to
connect your VRT-401G’s WAN port to your ISP (see screen below).
Note
: Different ISP’s require different methods of connecting to the Internet, please check with
your ISP as to the type of connection it requires.
Menu
Description
1.1 Cable Modem
Your ISP will automatically give you an IP address
1.2 Fixed-IP xDSL
Your ISP has given you an IP address already
1.3 PPPoE
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
1.4 PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
1.5 L2TP
Your ISP requires you to use a Layer Two Tunneling Protocol
(L2TP) connection.
1.6 Telstra Big Pond
This Protocol only used for Australia’s ISP connection.
Click on one of the WAN type and then proceed to the manual’s relevant sub-section (
1.1
,
1.2
,
1.3
,
1.4
,
1.5
or
1.6
). Click on
Back
to return to the previous screen.
17
Summary of Contents for VRT-401G
Page 1: ...54M Wireless VPN Firewall Router VRT 401G User s Manual 1...
Page 37: ...AP Mode setting Page Station Ad Hoc mode setting page 37...
Page 38: ...Station Infrastructure mode setting page AP Bridge Point to Point mode setting page 38...
Page 39: ...AP Bridge Point to Multi Point mode setting page AP Bridge WDS mode setting page 39...
