background image

Copyright 

Copyright (C) 2005 PLANET Technology Corp. All rights reserved.   

The products and programs described in this User’s Manual are licensed products of PLANET Technology, This 

User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all 

accompanying hardware, software, and documentation are copyrighted.   

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic 

medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, 

or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without 

the prior express written permission of PLANET Technology. 

 
Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, 

and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, 

merchantability, or fitness for a particular purpose. 

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any 

inaccuracies or omissions that may have occurred. 

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the 

part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s 

Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and 

reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s 

Manual, at any time without notice. 

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your 

comments and suggestions. 

 
CE mark Warning 

The is a class B device, In a domestic environment, this product may cause radio interference, in which case the 

user may be required to take adequate measures. 

 

WEEE Warning 

 

To avoid the potential effects on the environment and human health as a result of the presence of 

hazardous substances in electrical and electronic equipment, end users of electrical and electronic 

equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of 

WEEE as unsorted municipal waste and have to collect such WEEE separately.   

 

Trademarks 

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware 

and software products by their trade names. In most, if not all cases, their respective companies claim these 

designations as trademarks or registered trademarks.

 

 

 

2

Summary of Contents for VIP-462DG













































Reviews: