background image

Name 

If this is not specified, the <SIP User Agent Name> is also used for the RE

GISTER request. Defaults to blank 

Max Auth 

Maximum number of times (from 0 to 255) a request may be challenged. 

Default is 2. 

Make ALL AVT 

Package 

For second dial tone, enable this item package Mark position is 1, disable 

this item will be 0. 

RFC 254.3 Call Hold 

If set to yes, unit will include c=0.0.0.0 syntax in SDP when sending a SIP 

re-INVITE to the peer to hold the call. If set to no, unit will not include the c

=0.0.0.0 syntax in the SDP.  

The unit will always include a=sendonly syntax in the SDP in either case.   

Defaults to yes 

SRTP 

Enable/Disable SRTP(Secure Real-time Transport Protocol) 

SRTP Prefer 

Encrypt  

SRTP encryption type. 

 

 

 

NAT setting 

Set your NAT Traversal parameters in the following interface. It is helpful for the device behind NAT 

 

 

 

Item 

Descriptions

 

NAT Traversal 

Enable/Disable NAT. 

VIP-361PE supports STUN traversal, choose “STUN” in the “NAT 

Traversal Mode” if you want traverse NAT/Firewall. 

STUN Server IP 

STUN server IP address, default is stun.fwdnet.net 

NAT Refresh Interval (sec) 

the interval to refresh 

Port 

STUN port 

 

 

20

Summary of Contents for VIP-361PE































































Reviews: