17
(2) Please carefully read the safety instructions.
(3) Optical transceiver equipment shall not be disassembled by
anyone without authorization.
(4) Check the product model tag stuck outside the cabinet to
prevent incorrect installation.
(5) The relation of the video of optical transmitter and optical
receiver is one-to-one.
3.3 Stand-alone Installation
To
install
a
pair
of
VF-101G/102G/106G-T
and
VF-101G/102G/106G-R stand-alone on a desktop or shelf,
simply complete the following steps:
(1) Turn off the power of the analog camera/monitor to which
the VF-101G/102G/106G-T or VF-101G/102G/106G-R will be
attached.
(2) VF-101G/102G/106G-T (Transmitter): Connect coaxial
cable from analog camera to video BNC port of the
VF-101G/102G/106G-T.
(3) Attach the suitable single mode fiber cable from the
VF-101G/102G/106G-T to VF-101G/102G/106G-R in the
remote side.
Note
After the VF-101G/102G/106G-KIT is powered on,
wait for at least 15 seconds before connecting
the connector to the optical fiber port or else the
connector may be damaged or you may get an
electric shock.