14
Note
By default, the four DIP switches, set at the
“ON”
position, are operated as
“CPE”
. For operating
as
“CO”
, please turn DIP 1 Switch to the
“OFF”
position. Then adjust the other DIP switches
accordingly to fulfill different network application
demands.
Note
Please
power off
the VDSL2 Bridge before
making any transmission mode adjustment.
3.3 Power Information
The central posts of the VDSL2 Bridge’s power jacks measure
2.5mm
wide that r5VDC power input. They conform to
the bundled AC-DC adapter and Planet’s media chassis. Should
you have the issue of power connection, please contact your
local sales representative.
Please keep the AC-DC adapter as a spare part when the
VC-231G/VC-231GF is installed to a media chassis.
2.5mm
Width of DC Receptacle: 2.5mm
+5V for each slot
DC receptacle is 2.5mm wide that matches the central
post, measuring 2.5mm wide, of the VDSL2 Bridge’s DC
jack. Do not install any improper unit.