3. Terminal Setup
To configure the system, connect a serial cable to a
COM port
on a PC or notebook
computer and to serial (console) port of the SGSD / SGSW Managed Switch. The
console port of the SGSD / SGSW Managed Switch is DCE already, so that you can
connect the console port directly through PC without the need of Null Modem.
SGSD / SGSW Managed Switch
RS-232
PC / Workstation
with
Terminal emulation software
Serial Port
Serial Port
9600,8,n,1
A terminal program is required to make the software connection to the SGSD /
SGSW Managed Switch. Windows’
Hyper Terminal
program may be a good
choice. The Hyper Terminal can be accessed from the
Start
menu.
1. Click
START
, then
Programs, Accessories
and then
Hyper Terminal
.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 9600
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None
ó
ó
ó
ó
ó
