Planet SG-4800, Quick Installation Manual

Page: 5 / 12

5
2.3 LED & Button definition
LED Color Status Description
PWR
Green Steady Power On
Off Off Power Off
DIAG Amber
Steady On System is crashed.
Blinking
System is on self-test after power on the
device.
Off System is ready.
WAN/DMZ
LINK/ACT
Green
Steady On Port has been connected & gets IP.
Blinking Transmit data.
Off
Not get the IP address, even the port has
been connected.
LAN
LINK/ACT
Green
Steady On LAN port has been connected.
Blinking Transmit data.
LAN/
WAN/DMZ
Speed
Green Steady On Works on 1000Mbps.
Amber Steady On Works on 100Mbps.
Off Off Works on 10Mbps.
Button Action Description
Reset
Press for 5 Secs
Warm Start
DIAG indicator: Amber LED flashing slowly.
Press Over 10 Secs
Factory Default
DIAG indicator: Amber LED flashing quickly.
2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DO NOT place anything on top of the device. Excessive weight could damage it.
l
DO NOT obstruct ventilation slots on each side of the router or expose it to
l
direct sunlight or other heat source. Be sure that there is adequate air flow
around the router.
Place the router on a flat surface to avoid any damage.
l