background image

 

 

- 2 - 

 

Trademarks 

Copyright 

 PLANET Technology Corp. 2006. 

Contents subject to revision without prior notice. 
PLANET is a registered trademark of PLANET Technology Corp.  All other trademarks belong to their respective 
owners. 

 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, 
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, 
merchantability, or fitness for a particular purpose. 

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any 
inaccuracies or omissions that may have occurred. 

Information in this User’s Manual is subject to change without notice and does not represent a commitment on 
the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s 
Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and 
reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s 
Manual, at any time without notice. 

If  you  find  information  in  this  manual  that  is  incorrect,  misleading,  or  incomplete,  we  would  appreciate  your 
comments and suggestions. 

FCC Warning

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate 
radio frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  Instruction  manual,  may  cause 
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the interference at his own expense.  

CE Mark Warning 

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case 
the user may be required to take adequate measures. 

WEEE Warning 

To avoid the potential effects on the environment and human health as a result of the presence of 

hazardous substances in electrical and electronic equipment, end users of electrical and electronic 

equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of 

WEEE as unsorted municipal waste and have to collect such WEEE separately. 

 

Revision

 

PLANET IEEE 802.3af Power over Ethernet Injector Hub User’s manual 
 

FOR MODEL:

 POE-400 

 

REVISION:

 1.0 (DECEMBER.2006) 

 

Part No.:

 EM_POE400v1 (2080-A31120-001)

 

Summary of Contents for POE-400










Reviews: