manualshive.com logo in svg

Planet POE-1200, User Manual

Share
Download
Planet POE-1200 User Manual Download Page 5

 

2 

 

 

Figure 1-1

 Power over Ethernet Application 

 

1.3 How to Use This Manual  

This Web Smart Power over Ethernet Injector Hub  User Manual is structured as follows: 

ƒ

 

  

Section 2, Installation 

It explains the functions of POE-1200 / POE-2400 and how to physically install the POE-1200 / POE-2400. 

ƒ

 

  

Section 3

, 

Management 

It contains information about the software function of the POE-1200 / POE-2400.

 

ƒ

 

Section 4, Web Configuration 

The section explains how to manage the POE-1200 / POE-2400 through Web interface.

 

ƒ

 

Section 5, Power over Ethernet overview  

The section explains the IEEE 802.3af Power over Ethernet theories.

 

ƒ

 

Section 6, PoE power Provision Process 

The section explains the PoE power provision process. 

ƒ

 

Section 7, Troubleshooting 

The section contains troubleshooting guide of the POE-1200 / POE-2400.

 

ƒ

 

Appendix A 

It contains cable information of POE-1200/2400. 

ƒ

 

Appendix B 

This section contains the Power over Ethernet compatibility information of the POE-1200 / POE-2400. 

 

In the following section, terms “

PoE

 

Injector Hub

” with upper case mean the two injectors, i.e. POE-1200 or POE-2400. 

Terms with lower case “

injector

” means any 802.3af power injectors. “

PD

” means the abbreviated from 802.3af powered 

device. 

Summary of Contents for POE-1200










































Reviews:

No comments

Brands by name

Popular brands

Load more brands