Planet PL-103E User Manual Download Page 2

 

2

Copyright 

Copyright (C) 2004 PLANET Technology Corp. All rights reserved.   

The  products  and  programs  described  in  this  User

s  Manual  are  licensed  products  of  PLANET 

Technology, This User

s Manual contains proprietary information protected by copyright, and this User

Manual and all accompanying hardware, software, and documentation are copyrighted.   

No  part  of  this  User

s  Manual  may  be  copied,  photocopied,  reproduced,  translated,  or  reduced  to  any 

electronic  medium  or  machine-readable  form  by  any  means  by  electronic  or  mechanical.  Including 

photocopying,  recording,  or  information  storage  and  retrieval  systems,  for  any  purpose  other  than  the 

purchaser's personal use, and without the prior express written permission of PLANET Technology. 

 
Disclaimer 

PLANET  Technology  does  not  warrant  that  the  hardware  will  work  properly  in  all  environments  and 

applications, and makes no warranty and representation, either implied or expressed, with respect to the 

quality, performance, merchantability, or fitness for a particular purpose. 

PLANET has made every effort to ensure that this User

s Manual is accurate; PLANET disclaims liability 

for any inaccuracies or omissions that may have occurred. 

Information  in  this  User

s  Manual  is  subject  to  change  without  notice  and  does  not  represent  a 

commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be 

contained  in  this  User

s  Manual.  PLANET  makes  no  commitment  to  update  or  keep  current  the 

information in  this  User

s  Manual, and  reserves  the  right to make  improvements  to  this  User

s  Manual 

and/or to the products described in this User

s Manual, at any time without notice. 

If  you  find  information  in  this  manual  that  is  incorrect,  misleading,  or  incomplete,  we  would  appreciate 

your comments and suggestions. 

 
CE mark Warning 

The is a class B device, in a domestic environment, this product may cause radio interference, in which 

case the user may be required to take adequate measures. 

 

Trademarks 

The  PLANET  logo  is  a  trademark  of  PLANET  Technology.  This  documentation  may  refer  to  numerous 

hardware and software products by their trade names. In most, if not all cases, these designations are 

claimed as trademarks or registered trademarks by their respective companies. 

 

Revision 

User

s Manual for Powerline Communication product 

Model: PL-103E, PL-103U 

Rev: 1.0 (Feb. 2004) 

Part No. EM-PL103 

Summary of Contents for PL-103E

























Reviews: