manualshive.com logo in svg

Planet NOVASwitch GSW-800S, User Manual, Page: 5 / 38

Share
Download
Planet NOVASwitch GSW-800S User Manual Download Page 5

 

GSW-800S User's Manual

 

5 

1. INTRODUCTION 

1.1 Package Contents 

Check the contents of your package for following parts: 

 

 GSW-800S. 

 

 User's manual. 

 

 Power cord. 

 

 19” rack mount brackets. 

 

 RS-232 cable. 

If any of these pieces are missing or damaged, please contact 
your dealer immediately, if possible, retain the carton including 
the original packing material, and use them against to repack 
the product in case there is a need to return it to us for repair. 

1.2 How to Use This Manual  

This GSW-800S User Manual is structured as follows: 

 

 Section 2, 

Installation

 

It explains the functions of GSW-800S and how to physically 
install the GSW-800S.

 

 

Section 3, 

Configuration

 

It contains information about the smart function  of GSW-800S.

 

 

Section 4 

Switch operation 

It  contains troubleshooting and specifications of GSW-800S. 

 

Appendices

 

 

It contains cable information of GSW-800S. 

Summary of Contents for NOVASwitch GSW-800S







































Reviews:

No comments