background image

Copyright 

 

Copyright (C) 2011 PLANET Technology Corp. All rights reserved. 

The products and programs described in this User’s Manual are licensed products of PLANET 

Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all 

accompanying hardware, software, and documentation are copyrighted. 

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium 

or machine-readable form by any means by electronic or mechanical. Including photocopying, recording, or information 

storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior express 

written permission of PLANET Technology. 

 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and 

makes no warranty and representation, either implied or expressed, with respect to the quality, performance, 

merchantability, or fitness for a particular purpose. 

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any 

inaccuracies or omissions that may have occurred. 

Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of 

PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET 

makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make 

improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice. 

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and 

suggestions. 

 

CE mark Warning 

There are class A and class B device, in a domestic environment, this product may cause radio interference, in which case 

the user may be required to take adequate measures. 

 
 

Trademarks 

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and 

software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or 

registered trademarks by their respective companies. 

 

WEEE Regulation 

To avoid the potential effects on the environment and human health as a result of the presence of hazardous 

substances in electrical and electronic equipment, end users of electrical and electronic equipment should 

understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted 

municipal waste and have to collect such WEEE separately. 

 
Revision 

User’s Manual for PLANET 2-Bay SATA NAS RAID Server 
Model: NAS-7202 
Rev: 1.00 (October. 2011)

 

Summary of Contents for NAS-7202
























































Reviews: