Planet NAS-3410 User Manual Download

Page: 7 / 108

Chapter 1

Introduction

To accommodate the increasing storage demands for enterprise, small business, SOHO, and

home use, PLANET provides a reliable and affordable solution, the NAS-3410. Regardless of the

operating systems installed in your network, the NAS-3410 has straightforward setup procedures

and can be installed in any existing network environment using its simple and intuitive

management interface.

1.1 Features

• 4 ATA 133 hot swappable IDE trays

• Supports RAID 0, 1, 5, JBOD with global hot-spare and RAID expansion

• Support smart-signaling & network-type UPS

• Two integrated 10/100/1000M Gigabit Ethernet ports

• Multi-protocol system support for Microsoft, Apple, UNIX/LINUX, and Novell networks

• Multi-language support and user friendly web management interface

• Fully integrated ability for Windows 2000 domains, NT 4.0 domains, and UNIX NIS domains

• Supports ACL (Access Control List) settings

• User quota control and folder quota control

• Built-in Trend Micro antivirus software

• NAS-to-NAS data synchronization with SmartSync

• Advanced RAID bad sector recovery mechanism

• E-mail notification, SNMP management (MIB II) and system buzzer alerts

• NAStart software utility for quick setup and system configuration backup

• Environmental monitoring of system/CPU temperature, CPU fan speed and CPU voltages

• Snapshot provides the ultimate solution to satisfying short-term backup needs (optional)

• The SmartExtend technology (IP Storage Aggregation) allows you to add NAS capacity on

demand (optional)

• Backup and archive important data to the local tape drive, or CD/DVD writer (optional)

1.2 Package Contents

The following items should be included:

• NAS Server unit (including 4 HDD trays)

• Power cord

• Screws

Summary of Contents for NAS-3410













































































































Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands

Planet NAS-3410, User Manual

Search results

Summary of Contents for NAS-3410

Reviews:

Related manuals for NAS-3410

Brands by name

Popular brands