3
1
Up select button
2
Down select button
3
HDD Door
4
LCD display
5
Link/Active LED of GbE
LAN port
6
Link/Active LED of 100 LAN
port
7
LED of System Status/Alert
8
Power Control Button
Attention:
1. When the NAS server is operating, press power button continuously over 4 seconds to shut
it off immediately. This shut-off activity should happen only when the NAS server is hung;
otherwise it may make the server non-operational or damage the drives.
2.
Once the power button is pressed, it takes around 20 seconds for shutdown.
LED definition:
LED
Color
Function
Green
Indicating system status.
1. One flash per 0.5 second: the system is booting.
2. One flash per 1.0 second: the system is being shutdown.
3. One flash per 2.0 second: the system is rebuilding.
4. Always on
:
the system is ready.
SYS
Orange
Indicating system alert.
1. When system is booting, the Yellow LED will turn on for
1 second while BIOS is doing POST (power on self test),
then the LED turns to green.
2. One flash per 1.0 second
:
one or two Fans fail. Fan 1
is the CPU fan. Fan 2 is the chassis fan.
3. One flash per 2.0 second: CPU is over heating.
Green
On: LAN is connected at 100Mbps speed.
Blink: Transmitting or receiving data through the LAN.
100
Orange
On: LAN is connected at 10Mbps speed.
Blink: Transmitting or receiving data through the LAN.
Green
On: LAN is connected at 1000Mbps speed.
Blink: Transmitting or receiving data through the LAN.
GbE
Orange
On: LAN is connected at 10/100Mbps speed.
Blink: Transmitting or receiving data through the LAN.
Summary of Contents for NAS-3200
