Multi-Homing Security Gateway User’s Manual
4.17 Status
In this section, the device displays the status information about MH-2K/4K. Status will display the network
information from the Configuration menu. The Administrator may also use Status to check the DHCP lease
time and MAC addresses for computers connected to MH-2K/4K.
4.17.1 Interface Status
Entering the Interface Status window
Click on
Status
in the menu bar, then click
Interface Status
below it. A window will appear and provide
information from the Configuration menu.
Interface Status
will list the settings for
LAN Interface
,
WAN 1/2
Interface
, and
DMZ Interface
.
4.17.2 System Info (MH-4000 only)
NOTE:
This function is not supported on MH-2000.
Entering the System Info window
Click on
Status
in the menu bar, then click
System Info
below it. A window will appear and display a table
with
CPU Utilization / Memory Usage and Ram Disk
Usage, the device will list them in this System Info.
- 230 -