- 18 -
3-15 The Port Mirroring page
If you want to monitor all receive and transmit packets of one port. You can do the following:
Choose the monitored port in " Mirror Source Port " choice box in the corresponding mirror
source module. Only one port can be monitored in one module at the same time.
Choose the corresponding target module, port in "Mirror Target Module" and "Mirror Target Port"
choice box.
Click the corresponding "Enabled" check box.
Press "Apply" button
3.17 IP Config
You can change the IP address, subnet mask and default gateway of the managed node. (You
can also do that from RS232 console). Enter the IP address, subnet mask and default gateway
in the corresponding edit box.
Figure 3-16 The IP Config page
If you want to change the user name or password for the managed node, the following steps is
needed:
Click the "Change Password" checkbox
Enter the user name in "Username" edit box
