10
Note
By default, the 4-position switches of the DIP switch, set
at the
“ON”
position, are operated as
“CPE”
. For oper-
ating as
“CO”
, please turn DIP 1 switch to the
“OFF”
position. Then adjust other DIP switches accordingly to
fulfill different network application demands.
DIP-1: Mode (CO / CPE)
CO (Central
Office)
The Master device mode, usually the CO device, is
located at the data center of ISP or enterprise to link to
the backbone.
CPE
(Customer
Premises
Equipment)
The Slave device mode, usually the CPE device, is
located at branch office, home or remote side as the
long reach data receiver. The CPE can be connected to
the PC, IP camera or wireless access point, or other
network devices.
Note
When the Industrial Ethernet Extender operates in
CPE
mode
, DIP switches 2, 3, and 4 are
without function
.
DIP-2: Transmission (G. INP and Interleave mode)
G. INP
Method of protection against bursts from other devices
or lines to impact your xDSL connection.
Interleave
Method of error correction used on xDSL connection.
Interleave requires additional latency to improve
resilience to burst of error.