5
1. Introduction
1.1 Checklist
Check the contents of your package for the following parts:
z
PoE Industrial Ethernet Extender x 1
z
User’s Manual x 1
z
DIN Rail Kit
z
Wall Mount Kit
If any of these items are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
1.2 Ethernet over VDSL2 Bridge Description
PLANET's state-of-the-art Ethernet-over-VDSL2 products are based on
two core networking technologies: Ethernet and VDSL2 (Very-high-
data-rate Digital Subscriber Line 2). This technology offers the
absolute fastest possible data transmission speeds over the existing
copper telephone lines or coaxial cables without the need for rewiring.
The IVC-2004PT PoE Industrial Ethernet Extender has a switching
architecture with 4 PoE of RJ-45 10/100Mbps ports and Asymmetric
or Symmetric Ethernet over VDSL port (Asymmetric means upstream
and downstream rate are not the same and Symmetric means
upstream and downstream rate are similar) – the VDSL port can be
RJ-11 or BNC Connector. The IVC-2004PT can set to Master or Slave
mode via a DIP switch. When IVC-2004PT (RJ-11) is connected with
another IVC-2004PT device, the performance will go up to 99/63Mbps
for asymmetric data rate within 200m and go up to 28/2Mbps at
1.4km. The IVC-2004PT (BNC) performance is up to 99/65Mbps for
asymmetric data rate within 200m and up to 31/4Mbps at 2.4km. This
capability is ideal for use as an Ethernet extender for your existing
Ethernet network.
