manualshive.com logo in svg

Planet ISW-504PS, User Manual

Share
Download
Planet ISW-504PS User Manual Download Page 51

 
 

User’s Manual 

 

Figure 4-28 

VLAN Group – 

Port-Based

 VLAN screen 

 

When Port-Based VLAN mode is selected, the displayed page includes the following configurable data. Description on 

Table 4-10

 

Object 

Description 

VLAN Type 

There’re three VLAN mode support – 802.1Q VLAN, Port-Bas VLAN and No 
VLAN. 

•

 

802.1Q

 – Packets income will be tagged with VID as the PVID setting. All ports 

on the switch belong to default VLAN (VID 1).  

•

 

Port-Base

 - Packets can only be broadcast among other members of the same 

VLAN group. Note all unselected ports are treated as belonging to the default 
system VLAN.  

•

 

Disable 

- Forbidden ports are not included in the VLAN 

If Port-based VLAN are enabled, then VLAN-tagging feature is ignored. 

Management VLAN 
Group 

At Port-Based VLAN mode, up to 5 VLAN groups can be configured. 

Member Port  

Select the physical interface for which you want to display or configure data. 

Table 4-10

 Descriptions of the Port-Based VLAN item 

 

-51 - 

 

Summary of Contents for ISW-504PS


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands