13
5. Installation
This section describes the functionalities of the Industrial
Ethernet Switch’s components and guides you to installing it on
the DIN rail and wall. Please read this chapter completely before
continuing.
Note
This following picture tells the user how to install
the device, and the device is not ISW-500T or
ISW-800T.
5.1 DIN-rail Mounting Installation
The DIN rail is screwed on the Industrial Ethernet Switch when
out of factory. When replacing the wall-mount application with
DIN-rail application, Industrial Ethernet Switch is needed. Please
refer to the following figures to screw the DIN rail on it. To
hang the Industrial Gigabit Ethernet Switch, follow the following
steps:
Step 1:
Screw the DIN rail on the Industrial Ethernet Switch.
