background image

 

30

DHCP Server Configuration

 

IPX-1500 has a built-in DHCP server that can automatically assign dynamic IP addresses to client PCs 

connected to its LAN ports, simplifying the task of IP address management. You can set up two IP 

address ranges for the DHCP server to use – the second range will be used only after the first range is 

all used up. Being able to set up two IP address ranges makes the system more flexible in terms of IP 

address usage.

 

Please select the 

DHCP server configuration 

icon:

 

 

 

Parameter Description

 

DHCP server 

Enable / Disable 

Please make sure all the following parameters are set properly before 
enabling the DHCP server. 

Lease Time (min) 

1440 

(default value)

 

The lease time is measured in minutes.   

Domain Name 

Please insert the domain name of the IPX-1500. 

Router IP 

Please insert the router’s IP address of the IPX-1500. 
If you want to use IPX-1500’s internal router, please insert the IPX-1500’s LAN 
IP address here, or use another router on the LAN then insert its IP address 
here instead. 

Assignment IP range 

Please insert the first IP address range. The values must be within 1 ~ 254, 
and the end value must be greater than the start value.   

Note that the first three numbers (unchangeable) should be the same as the 
first three numbers of IPX-1500’s LAN IP address. If not, then you must 
correct IPX-1500’s LAN IP address setting first. 

Assignment IP range 

Please insert the second IP address range. The DHCP server will start to use 
the second range only after the first range is all used up. If you don’t need to 
use the second range, please insert zero for both the start value and the end 
value. 

Summary of Contents for IPX-1500






















































































Reviews: