Planet IP DSLAM IDL-2400 User Manual Download Page 264

Page: 264 / 707

IDL series User Guide

264

5.9.15 Adsl atur intervalext Commands

5.9.15.1 Get adsl atur intervalext

Description:

This command is used to get.

Command Syntax:

get adsl atur intervalext

[

ifname

<interface-name>] [

nintrvl

<nintrvl-val>]

Parameters:

Name

Description

ifname

<interface-name>

The ADSL interface name.

Type

: Get – Mandator

Valid values:

dsl-0 – dsl-23

nintrvl <

nintrvl-val>

Count from 1 through 96, of 15 minute intervals.

Type:

Get -- Mandatory

Valid values:

1 - 96

Example:

$ get adsl atur intervalext IFNAME dsl-0 NINTRVL 1

Output:

Ifname : dsl-0

IntervalNumber : 1

IntervalSesl(sec) : 10 IntervalUasL(sec) : 10

IntervalFecsL(sec) : 10

Output Fields:

FIELD

Description

Ifname

The ADSL interface name.

IntervalNumber

Count from 1 through 96, of 15 minute intervals.

IntervalSesl(sec)

Count of seconds in the interval when there was severely errored seconds.

IntervalUasL(sec)

Count of seconds in the interval when there was unavailable errored seconds.

IntervalFecsL(sec)

Count of seconds in the interval when there was Forward error correction seconds.

References

atur interval related commands

Summary of Contents for IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands

Planet IP DSLAM IDL-2400, User Manual

Search results

Summary of Contents for IP DSLAM IDL-2400

Reviews:

Related manuals for IP DSLAM IDL-2400

Brands by name

Popular brands