User’s Manual of IMG-2x00T Modbus Gateway Series
29
2.2.3 Wall Mount Plate Mounting
To install the
Modbus Gateway
on the wall, please follow the instructions below.
Follow all the DIN-rail installation steps as shown in the example.
Step 1:
Remove the DIN-rail bracket from the
Modbus Gateway
. Use the screwdriver to loosen the screws to remove the
DIN-rail.bracket.
Step 2:
Place the wall-mount plate on the rear panel of the
Modbus Gateway
.
Step 3:
Use the screwdriver to screw the wall-mount plate on the
Modbus Gateway
.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the
Modbus Gateway
on the wall.
Step 5:
To remove the wall-mount plate, reverse the steps above.
Summary of Contents for IMG-2100T
Page 16: ...User s Manual of IMG 2x00T Modbus Gateway Series 16 IMG 2105AT 32 x 87 x 135 mm W x D x H...
Page 18: ...User s Manual of IMG 2x00T Modbus Gateway Series 18 IMG 2200T 32 x 87 x 135 mm W x D x H...
Page 19: ...User s Manual of IMG 2x00T Modbus Gateway Series 19 IMG 2400T 56 x 87 x 135 mm W x D x H...
