28
5.2.3 Drive Redirection
To use this feature, you need to install KVM Vision Viewer on the client machine.
The KVM Vision Viewer can be found in the bundled CD-ROM. Please follow the
KVM Vision Viewer Setup Wizard step by step to install the software.
Warning:
1. Drive Redirection is only possible with Windows 2000 and the latter version.
2. The Drive Redirection works on a low SCSI level and the SCSI protocol cannot
recognize partitions; therefore the whole drive selected will be shared instead
of any particular partition.
3. While connecting to a legacy KVM switch, please select PS/2 mouse for
Key-
board/Mouse setting
from webpage. Otherwise you will be not be able to use
Hot-key.
Create a New Device in KVM Vision Viewer
1. Start KVM Vision Viewer
2. Click on
“
Device
”
and select
“
New Device
”
to create a new device
