7
4. Terminal Setup
To configure the system, connect a serial cable to a
COM port
on a PC or notebook
computer and to RJ45 type serial (console) port of the Industrial Managed Switch.
PC/Workstation with
Terminal Emulation Software
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
RJ45 to DB9 RS232 Cable
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
