12
Figure 4-3:
Configuring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
Store the current switch configuration
5. At the
“#”
prompt, enter the following command and press
<Enter>
.
# copy running-config startup-config
Figure 4-4:
Saving Current Configuration Command Screen
If the IP is successfully configured, the Industrial Managed Switch will
apply the new IP address setting immediately. You can access the Web
interface of the Industrial Managed Switch through the new IP address.
Note
If you are not familiar with the console command or the
related parameter, enter
“help”
anytime in console to
get the help description.
