Planet IGS-1020PTF Series, User Manual, Page: 4 / 17

4
2. Hardware Introduction
2.1 Switch Front Panel
The front panels of the Industrial PoE+ Switches consist of Ethernet interfaces
and LED indicators as shown below:
9 10
9 10
100/1000X SFP
LNK ACT
1000
10/100/1000T
IGS-1020PTF
6
4
2
7
5
3
1
8
LNK
ACT
PoE-in-Use
802.3at PoE+
P1 P2 Alarm
240W
PoE Usage
180W
120W
60W
Standard Extend (Ports 5~8)
Mode
9 10
9 10
100/1000X SFP
LNK ACT
1000
10/100/1000T
IGS-1020PTF-12V
6
4
2
7
5
3
1
8
LNK
ACT
PoE-in-Use
802.3at PoE+
P1 P2 Alarm
240W
PoE Usage
180W
120W
60W
Standard Extend (Ports 5~8)
Mode
Figure 2-1: IGS-1020PTF front
panel
Figure 2-2: IGS-1020PTF-12V
front panel

Gigabit TP Interfaces (Port 1 to Port 8)
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters in standard
mode.

Gigabit SFP Slots (Port 9 to Port 10)
100/1000BASE-X mini-GBIC slot, SFP (small factor pluggable) transceiver
module: From 550 meters to 2 kilometers (multi-mode fiber) and up to
10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber).

DIP Switch for Port 5 to Port 8
The Industrial PoE+ Switch has a built-in solid DIP switch that provides
“Standard” and “Extend” operation modes. The Industrial PoE+ Switch
operates as a normal IEEE 802.af/at PoE+ Switch in the “Standard” operation
mode.