18
6. Recovering Back to Default Configuration
To reset the IP address to the default IP address
“192.168.0.100”
and the
user password to factory default mode (default password is
admin
), press the
hardware-based reset button on the front panel for about 10 seconds. After the
device is rebooted, you can login the management Web interface within the same
subnet of 192.168.0.xx and default password. Be noted that all the previous
setups will be disappeared after the factory default reset is made.
9
LNK/ACT
1000
LNK/ACT
1000
10
Console
115200,N,8,1
P1 P2
Ring R.O.
FAULT
9
10
100/1000X SFP
RESET
LNK
ACT
LNK
ACT
PoE-in-Use
Figure 6-1:
IGS-10020PT/IGS-10020HPT Reset Button
