User’s Manual
104
Figure 4-2-29:
Software Image Selection page Screenshot
The page includes the following fields:
Object
Description
•
Image
The flash index name of the firmware image. The name of primary (preferred)
image is image, the alternate image is named image.bk.
•
Version
The version of the firmware image.
•
Date
The date where the firmware was produced.
Buttons
: Click to use the alternate image. This button may be disabled depending on system state.
4.2.26 Factory Default
You can reset the configuration of the Industrial Managed Switch on this page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in
Figure 4-2-30
appears.
Figure 4-2-30:
Factory Default page Screenshot
Summary of Contents for IGS-10020
