Planet ICA-HM312 User Manual Download Page 36

Page: 36 / 94

25B

3.5 System Setting

Use this menu to configure the network to connect the device and the clients.

This function is only available for user logged into Camera as administrator.

Click on each menu name to display its setting page.

Item

Action

Network

Configure Network settings such as DHCP, DDNS, 3GPP, PPPoE and

UPnP.

Camera

Adjust camera parameters, position, and set camera tour.

System

Configure system information, date & time, maintenance, and view

system log file.

Video

Configure bit rate and frame rate of video profiles.

Audio

Configure audio parameters.

User

Setup user name, password and login privilege.

E-Mail

Setup E-Mail configuration.

Object Detection

Setup Object detection.

Event Server

Setup FTP/TCP/HTTP server for event.

Event Schedule

Configure the schedule while event triggered.

Summary of Contents for ICA-HM312































































































Search results

Summary of Contents for ICA-HM312

Reviews:

Related manuals for ICA-HM312

Brands by name

Popular brands

Planet ICA-HM312, User Manual

Search results

Summary of Contents for ICA-HM312

Reviews:

Related manuals for ICA-HM312

Brands by name

Popular brands