8
Chapter 3. Camera Windows Utility
This chapter shows how to quickly set up your IP camera. The IP camera is with
the default settings. However, to help you find the networked IP camera quickly,
the Windows utility (PLANET IPInstaller) can search the IP camera in the network
that can help you to configure some basic setting before you start advanced
management and monitoring.
Please insert the bundled CD disk into your CD/DVD-ROM drive. When the
welcome web page appears, please click your IP camera name on the IP camera
list, i.e. ICA-8000 series. Then click on the utility IPInstaller to start the program.
3.1 Network Configuration
Please click the
“Search Network Device”
button. PLANET IPInstaller will list
the networked IP camera in the LAN. If the IP camera cannot be found, you may
check whether this IP camera is connected to the network properly and press the
search button again.
1. Click the menu bar
Device Search
to search the device in the LAN.
2. Select the IP camera with the MAC address corresponding to the IP camera that
is to be configured.
