background image

                                                                                                 

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. 
However, special attention must be paid to the dangers of electric shock and static electricity 
when working with electrical equipment. All guidelines of this and of the computer 
manufacture must therefore be allowed at all times to ensure the safe use of the equipment

 

CE Mark Warning 

This is a Class B product. In a domestic environment, this product may cause radio 
interference, in which case the user may be required to take adequate measures. 

 

WEEE Regulation 

To avoid the potential effects on the environment and human health as a result of the 
presence of hazardous substances in electrical and electronic equipment, end users 
of electrical and electronic equipment should understand the meaning of the 
crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal    
waste and have to collect such WEEE separately. 

 

Revision 

User’s Manual for PLANET 15 meter IR Dome Internet Camera 
Model: ICA-530 (for F/W v 3.0 or above) 
Rev: 2.0 (June, 2008) 
Part No. EM-ICA530v2 
 

 

 2 

Summary of Contents for ICA-530













































































Reviews: