manualshive.com logo in svg

Planet ICA-5250, User Manual

Share
Download
Planet ICA-5250 User Manual Download Page 56

                                                                              Full HD Ultra-mini Vandal Dome 

                                                                                                                                                          ICA-5250

 

Network Dis-connected 

To avoid video loss, the camera will start to save the video to 
local SD card when it detects no network connection. The 
video recording will continuously be saved into SD card and 
divided into every 10 minutes a file until the network is 
reconnected successfully. The oldest file will be deleted if the 
capacity of SD card is full. 

Network IP check 

Key in the target IP address and interval. The camera checks 
once in a while according to the setting interval time if it can link 
to the target IP address. If connection fails, the camera starts to 
save the video to SD card 

 

3.8.2 Schedule 

 

 

 

Schedule 

After complete the schedule setup, the camera data will be 
recorded according to the schedule setup.

 

Snapshot 

After enable the snapshot function, user can select the storage 
position of snapshot file, the interval time of snapshot and the 
reserved file name of snapshot. 

Interval 

The interval between two snapshots. 

 

3.8.3 I/O Setting 

The ICA-5250 supports 1 input/1 output. When input is triggered, it can send the video to some 
specific mail addresses, transmit the video to remote ftp server, and trigger the relay and SAMBA. 

 
 

 

56

Summary of Contents for ICA-5250











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands