background image

                                                                  HD Ultra-mini Bullet IR IP Camera 

                                                                                                                                                    ICA-3110

 

bandwidth is divided. For example, if you set 5, 10, and 20 for the three items, then the bandwidth of 
the three items is 5:10:20. There is no difference between setting "0, 0, 0" or "63, 63, 63" because 
under these two settings, the three items will get equal bandwidth (1/3). 
 
The three stream control protocols are as follows: 
• Live Stream (Video and audio): RTP / RTSP 
• Event / Alarm : FTP / SMTP /    SAMBA /    SIP 
• Management: HTTPS / HTTP / SNMP 

 

 

The "Management" stream handles both the live view and the setting area of the 
web page on which the data is transferred via http/https protocol. If you prefer to 
distribute more bandwidth when using the web browser to access the camera, 
please adjust the Management stream. 

 

IEEE 802.1x 

 

IEEE 802.1x is an IEEE standard for port-based Network Access Control. It provides an 
authentication mechanism to device wishing to attach to a LAN or WLAN. 
 
The EAPOL protocol supports service identification and optional point to point encryption over the 
local LAN segment. 
 
Please check what version of the authenticator and authentication server support. This camera 
supports EAP-TLS method. Please enter ID and password issued by the CA, and then upload 
related certificates. 

 

40

Summary of Contents for ICA-3110







































































Reviews: