3
Rear panel of ICA-302
IVS-100
1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the LAN port located on the ICA-500
rear panel and attach the other end to the network device (hub or switch).
2. Attach the external power supply
Connect the provided power adapter to the ICA-500’s connector labeled
“12VDC” on rear panel.
3. Check the LEDs
The STATUS would be ON, and the 10/100 LED would flash for few times to
detect network connection. The network indication LEDs would be on depend-
ing on which network type is available.
Rear panel of I
VS
-100