User’s Manual of IAP-200x Series
-32-
The allowed string length is 0 to 255.
System Location :
The physical location of this node (e.g., telephone closet, 3rd floor).
Allowed IP to Access:
Indicates the host can access the AP from SNMP interface that the host IP
address matched the entry.
Read Community :
Here you can define and fill the Read community string.
Read only. Enables requests accompanied by this community string to
display MIB-object information.
Write Community :
Here you can define and fill the Write community string.
Write. Enables requests accompanied by this community string to display
MIB-object information and to set MIB objects.
Trap Configuration
Object
Description
Mode :
Indicates the SNMP trap mode operation. Possible modes are:
Enabled
: Enable SNMP trap mode operation.
Disabled
: Disable SNMP trap mode operation.
Trap Community:
Enter the community string for the trap station.
Trap Destination :
Enter the IP address of the trap manager.
Click
Apply
to make the configuration take effect. Click
Reset
button to reset the whole configuration to default.
4.3.4. Status
Users can check the current status of the IAP-2000 in this page. The Status page provides information for the
current device information. This page helps a network administrator to identify the model name, firmware /
hardware version and MAC address. The screen in
Figure 4-7
appears.
Summary of Contents for IAP-2000PE
Page 1: ......
