Planet GTP-805A User Manual Download Page 3

FCC Warning

This equipment has been tested and found to comply with the 
regulations for a Class A digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with this user’s guide, may 
cause harmful interference to radio communications. Operation 
of this equipment in a residential area is likely to cause harmful 
interference, in which case the user will be required to correct 
the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this 
product may cause radio interference, in which case the user 
may be required to take adequate measures.

Energy Saving Note of the Device

This power required device does not support Standby mode 
operation. For energy saving, please remove the DC-plug to 
disconnect the device from the power circuit. Without removing 
the DC-plug, the device will still consume power from the 
power source. In view of Saving the Energy and reducing the 
unnecessary power consumption, it is strongly recommended to 
remove the DC-plug if this device is not intended to be active.

Summary of Contents for GTP-805A

























Reviews: