3
•
Attach MM fiber cables from the FT-7XX to the MM fiber
network. TX, RX must be paired at both ends
•
Attach SM fiber cables from the FT-7XX to the SM fiber
network. TX, RX must be paired at both ends.
•
Connect the 5VDC power adapter to the FT-7XX and verify
that the Power LED lights up.
•
Turn on the power of the device/station, the Link and LEDs
should light when all cables are attached
FT-7XX
100Base-FX
Multi-Mode
Fiber Network
100Base-FX
Single-Mode
Fiber Network
Note:
n
To prevent from optic acceptor malfunction, check the both
wires before power on the converter.
6. Duplex Mode setting
The FT-7XX is a transparent device between the two fiber
networks, please make sure the both networks are set to the same
duplex environment, or you may get a worse performance in both
networks. Connect with full-duplex Fast Ethernet networks are
strongly recommended.
7.LED indication
LED
COLOR
DESCRIPTION