13
FT-1205A
Switch 1
On
2-Port Redundant (Fiber)
Off
3-Port Switch (default)
Switch 2
On
LBR ON
Off
LBR OFF (default)
2-Port Redundant (FT-1205A)
When Fiber Redundancy is enabled, Fiber Port-1 (1) and Fiber
Port-2 (2) are configured as either forwarding or disabled. At
any given time, one port will be disabled and one port will be
forwarding.
3-Port Switch
When Fiber Redundancy is disabled, all ports (Port-1, Port-2 and
Port-3) act as normal bridging ports.
Note
FT-1105A / FT-1205A supports
OAM/TS-1000
protocol for remote status monitor. To enable the
OAM support function, set the DIP Switch 2
“On”
.
