Planet FSD-805, User Manual, Page: 20 / 22

1
There are 8 wires on a standard UTP/STP cable and each wire is
color-coded. The following shows the pin allocation and color of
straight cable and crossover cable connection:
Straight Cable
SIDE 1
SIDE 1
SIDE 2
SIDE 1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
SIDE 2
Straight Cable
SIDE 1 SIDE 2
1 = White/Orange
2 = Orange
3 = White/Green
4 = Blue
5 = White/Blue
6 = Green
7 = White/Brown
8 = Brown 1 = White/Orange
2 = Orange
3 = White/Green
4 = Blue
5 = White/Blue
6 = Green
7 = White/Brown
8 = Brown
1 = White/Orange
2 = Orange
3 = White/Green
4 = Blue
5 = White/Blue
6 = Green
7 = White/Brown
8 = Brown 1 = White/Orange
2 = Green
3 = White/Orange
4 = Blue
5 = White/Blue
6 = Orange
7 = White/Brown
8 = Brown
Figure A-1 Straight-Through and Crossover Cable
Please make sure your connected cables are with same pin
assignment and color as above picture before deploying the
cables into your network
A.3 Fiber Optical Cable Connection Parameter
The wiring details are as below:
¢
Fiber Optical patch Cables:
Standard Fiber Type Cable Specification
100Base-FX
(1300nm)
Multi-mode 50/125μm or 62.5/125μm
100Base-FX
(1310nm)
Single-mode 9/125μm