User’s Manual of FSD-804PS
Management VLAN
Specifies the management VLAN ID of the Switch. It may be configured to any
value in the range of
1 - 16
. The management VLAN is used for management of
the Switch.
VLAN Group
At Port-Based VLAN mode, up to 8 VLAN groups can be configured.
Member Port
Select the physical interface for which you want to display or configure data.
4.5.1.2 IEEE 802.1Q VLAN
This function group individual ports into a small
“Virtual”
network of their own to be independent of the other ports. The
By setting the VLAN Type with
802.1Q
, IEEE 802.1Q tag-based VLAN is enabled. VLAN classification is the first step
before VLAN table lookup. The PoE Switch will check the VID value of the received packets and the VLAN table in-
gress/egress rule, then forwards the packets to valid destination ports.
Select
“802.1Q VLAN”
and press
“Apply”
button, to enable the IEEE 802.1Q VLAN function then continue configure
sixteen 802.1Q VLAN groups as your request. After setup completed, please press
“Apply”
to take affect. The IEEE
802.1Q VLAN Group member configuration screen in
Figure 4-25
appears.
Figure 4-25
VLAN Group –
802.1Q
VLAN screen
- 39 -
