background image

User Manual of FRT-405N 

 

 

43

is NOT the same as planet. 

Multiple SSID 1/2/3/4 

There are 4 multiple SSIDs. Enter their descriptive names that you 
want to use. 

Broadcast Network 
Name (SSID) 

Select 

Enable

 to allow the SSID broadcast on the network, so that the 

STA can find it. Otherwise, the STA cannot find it. 

AP Isolation 

Enable 

or 

disable

 AP Isolation. When many clients connect to the 

same access point, they can access each other.   

If you want to disable the access between clients which connect the 
same access point, you can enable this function. 

MBSSID AP Isolation 

Enable or disable MBSSID AP Isolation. 

BSSID 

Basic Service Set Identifier. This is the assigned MAC address of the 
station in the access point.   

This unique identifier is in Hex format and can only be edited when 
Multi BSSID is enabled in the previous screen. 

 
Frequency (Channel) 

A channel is the radio frequency used by wireless device. Channels 
available depend on your geographical area. You may have a choice 
of channels (for your region) and you should use a different channel 
from an adjacent AP to reduce the interference. The Interference and 
degrading performance occurs when radio signals from different APs 
overlap. 

 

HT Physical Mode

 

 

Summary of Contents for FRT-405N













































































































Reviews: