Planet FPS-1011, User Manual

Page: 9 / 82

3. Getting Started
Before you start, you should have:
„
One computer with Windows 98SE/Me/NT/2000/XP for normal printer
installation, if you are using GDI printer, please make sure your computer
with Windows 98SE/Me/2000 SP4 above/XP SP1 above
„
One GDI printer or general printer with USB port and an installation CD
„
One Category 5 Ethernet Cable
„
One USB Cable
3.1 Hardware Installation Procedure
1. Unpack the FPS-1011 package and verify that all the items listed in the
previous section are provided.
2. Plug the USB cable to the FPS-1011 with the GDI printer or general printer
that you want to share on the network.
3. Connect the FPS-1011 to your network by attached the network cable to the
network port of the FPS-1011.
4. Connect the power adapter to the FPS-1011. The FPS-1011 will perform the
Power-On-Self-Test (POST) after it is powered on. When the ACT LED is
unlighted, the FPS-1011 is ready.
"
Note
1. You must use the power adapter shipped along with the
FPS-1011, do NOT use any other power adapter from other
sources.
2. To prevent the compatibility problem between FPS-1011
and a few GDI printer or printer, it is recommended that
you power on the FPS-1011 before the GDI printer or
general printer.
3.2 Software Installation Procedure
"
Note
You have to uninstall all the Print Server drivers and utilities if
you have installed the previous version.
1.
Insert Drivers and User’s Manual CD into the CD-ROM drive to initiate the
autorun program. Once completed a menu screen will appear
2.
. Click on “Administrator Installation” hyper link to initiate the installation. Or
you can click the “Start” button and choose “Run”. (Suppose “E” is your
CD-ROM drive). When the dialog box appears, enter “E:\Utility\Setup.exe”
and press enter key. You will see the dialog box as below. Please click “Next”
to continue.
3.
The “Print Server Utilities - InstallShield Wizard” is displayed, click "Next".
9