6. Server
Configuration
6.1 Introduction
This chapter introduces MFP Server’s system configuration utility in Windows environment.
This utility provides the most complete management and configuration functions on the MFP
Server side. This utility only provides configuration functions for MFP Server itself; it does not
include configuration functions for client side or other file server in the network environment.
The Configuration Utility provides the following configuration and management functions:
Status:
Display MFP Server Network Status.
Setup:
Configure the MFP Server detail settings.
General Configuration:
Configure general settings about the MFP Server
such as Server Name, Password, etc.
TCP/IP Configuration:
IP Address and DHCP Server Configuration.
System Configuration:
MFP Server Network Ability Setting and Firmware
Upgrade.
Wireless Configuration:
Configure wireless settings and operating mode.
MFP Server Management:
For administrator to manage the MFP Server.
Administrator can force disconnect the current connection and setup idle time out
of the MFP Server.
Report:
List the some information of all available MFP Servers on the Network.
Refresh:
Refresh the MFP Server’s status by pressing the “Refresh” button.
Reboot:
Restart the MFP Server by pressing the “Reboot” button.
25
Search MFP Server:
Search all available MFP Servers on the Network.
