12
2. Hardware Description
These switches provide three different running speeds – 10Mbps, 100Mbps and
1000Mbps and automatically distinguish the speed of the incoming connection. This
section describes the hardware features of LCD Switch. For easier management
and control of the LCD Switch, familiarize yourself with its display indicators and
ports. Front panel illustrations in this chapter display the unit LED indicators.
Before connecting any network device to the LCD Switch, please read this chapter
carefully.
2.1 Front Panel
The front panel of the LCD Switch consists of 4 10/100BASE-TX 802.3bt PoE++
ports, 12 10/100BASE-TX 802.3at PoE+ ports, 2 10/100/1000BASE-T RJ45 ports
and 2 additional 10/100BASE-X SFP ports. The LCD monitor and LED Indicators are
also located on the front panel of the LCD Switch.
6
5
8
7
10
9
12
11
14
13
16
15
FGSW-2022VHP
Menu (5 sec)
Enter
Back
1
PWR
Up
Down
5
9
13
3
7
11
15
PoE
2
6
10
14
4
8
12
16
PoE-in-Use
ACT
LNK
Gigabit
17 19
18 20
ACT
LNK
100
1000
18
17
20
19
12-Port 10/100TX
802.3at PoE
+
4-Port 10/100TX
802.3bt PoE
+
4-Port Gigabit Ethernet Switch
2
4
1
3
Figure 2-1:
FGSW-2022VHP Front Panel
Fast Ethernet TP interface (Port 1 to Port 16)
10/100BASE-TX copper, RJ45 twisted-pair: Up to 100 meters.
Ports 1 to 4 support IEEE 802.3bt.
Ports 5 to 16 support IEEE 802.3at.
Gigabit TP Interface (Port 17 to Port 18)
10/100/1000BASE-T copper, RJ45 twisted-pair: Up to 100 meters.
Gigabit SFP Slots (Port 19 to Port 20)
10/100BASE-X mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module:
From 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers
(single-mode fiber).
Smart LCD
The Smart LCD that is located on the front panel of the FGSW-2022VHP
provides “PoE Management and Status”, “Switch Mode: Standard, VLAN, Extend”,
“Budget and Bandwidth Control”, “PD alive check”, “Screen Saver”, “PD Type”,
“Password”, “Fan Control”, and “ Factory Default”.
