background image

1

INTRODUCTION

The ENW-5601, 56k PCMCIA Fax Modem is a credit-card-size Type
II PC card that complies with the PCMCIA 2.1 standards.
The ENW-5601 is Bell, ITU-T (formerly CCITT) compliant and
Hayes AT command compatible, so that it can be used worldwide with
today’s popular communication software programs. You will be able
to send and receive faxes to/from any Group 3 compatible fax machine.
Using standard phone lines, the data communication functions of the
modem will enable you to successfully hook up to the Internet,
transmit E-mail, send and receive information and communicate with
other PCs, Bulletin Board Services (BBS) or computer networks such
as Compuserve

Specifications

Data

:

V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, and V.21,
Bell 212A and Bell 103

Fax

:

V.17, V.29, V.27ter, and V.21 channel 2        Group 3 send and
receive facsimile

Error Correction

:

V.42 and MNP 2-4

Data Compression

:

V.42bis and MNP 5

Communication software compatible commands

:

Hayes compatible enhanced "AT" command set
Fax Service Class 1 commands

Built-in DTE interface

:

DTE speed up to 115,200 bps
16C550 UART interface

Summary of Contents for ENW-5601
















Reviews: