Bluetooth USB Adapter User Guide
Open a connection to the Dial-up Networking service that is provided by another
Bluetooth device using one of these techniques:
‧
Windows system tray, Bluetooth icon
‧
From My Bluetooth Places
‧
Using the Bluetooth Setup Wizard
After the Bluetooth dial-up networking connection is established it can be used the
same way as any other networking connection. For example, you can open a browser
and explore the World Wide Web, if the remote computer has Internet access.
Close a Dial-up Networking connection
‧
In My Bluetooth Places, right-click the service name and select Disconnect
or
‧
If the connection was established from the Bluetooth icon in the Windows sys-
tem tray; click the Bluetooth icon, select Quick Connect, Dial-up Networking and
then select the device that is providing the service (active connections have a
checkmark in front of them).
Configure
The Bluetooth Configuration Panel > Client Applications > Dial-up Networking >
General tab provides options to configure:
‧
The application name—to change it, highlight the existing name and enter the
new name.
‧
Enable or disable secure connection. To enable secure connection, place a
checkmark in the box.
‧
The Bluetooth virtual device to be used.
NOTE
: Unless you have a specific reason to do so, DO NOT CHANGE the default
Bluetooth device or alter the device's configuration.
6.5.7 Fax
Overview
The Bluetooth Fax service allows this computer to send a fax using a Fax/Modem that
is physically connected to a remote device.
To Send a Fax
1. Open a connection to the Fax service that is provided by another Bluetooth de-
vice, using one of these techniques:
Windows system tray, Bluetooth icon
From My Bluetooth Places
Using the Bluetooth Setup Wizard
2. Open or create the document to be faxed and select the “Print,” “Send to Fax
Recipient” or similar command that is available in most applications.
Close a Fax Connection
Fax connections close automatically when the Fax transmission is complete.
Configure
The Bluetooth Configuration Panel > Client Applications > Fax > General tab provides
options to configure:
‧
The application name—to change it, highlight the existing name and enter the
new name.
‧
Enable or disable secure connection. To enable secure connection, place a
checkmark in the box.
6.5.8 Headset
26
